|
联系方式 ： 13352927502
The new Check-Line 3000PRO Series coating thickness gauge is a multifunctional fully menu driven gauge for fast, professional and precise coating thickness measurement for:
1. paint and electroplated coatings on iron and steel
2. paint and anodizing coatings on non-ferrous metals and on austenitic stainless steels
The user will select one or more probes best suited for their application to connect to the Checkline 3000PRO gauge as all the probes are interchangeable and their internal calibration is stored within a small microchip inside the probe connector housing. This provides for quick and easy hot-swapping from one probe to any other in seconds.
Eight (6) separate probes are offered for a wide variety of applications.
Automatic identification of the substrate
Highly wear-resistant measuring poles made of carbide metal
Special probes for unusual measurement tasks
Safe use even for special applications such as sand-blasted surfaces, small parts and curved surfaces
Scan mode for the quick recognition of coating thickness variations on large surfaces, including display of minimum and maximum readings
Display backlight for poor ambient lighting conditions
Online statistics with all statistical parameters
Extensive memory storage for recording of up to 10,000 data pints in up to 500 separate files "batches"
Alphanumerical file names can be used to identify each of the separate files "batches"
Infrared interface for wireless data transfer to printer and PC or via built-in RS-232
Includes FREE software for transferring data to a PC including histogram function
Optional high temperature footer for measuring on surfaces up to 150 °C/302 °F
Includes Traceable Calibration Certificate
1 Year Warranty
Measuring principle: | Magnetic induction method (F-version); Eddy current method (N-version) |
Measuring range: | 3000PRO: |
Tolerance: | ± (0.7 µm/0.04 mils + 1% of reading) |
Resolution: | Refer to RESOLUTION TABLE, above |
Display: | 4-digit display (digit height 10 mm/0.4") and 32 alphanumerical characters; switchable backlight |
Minimum measurement area: | 5 mm x 5mm/0.2" x 0.2" |
Minimum curvature radius: | convex 2mm/0.08"; concave 5mm/0.2" |
Minimum substrate thickness: | 0.2mm/8 mils (for F-versions); 50 µm/2 mils (for N-versions) |
Calibration methods: | - Factory calibration: no calibration required for standard applications |
Limit values: | Selectable; optical and acoustic signal if limit value is exceeded |
Scan mode: | For continuous measurements; for the quick recognition of coating thickness variations; |
Statistics: | Single-value statistics: n, avarage x, s, kvar, min, max, cp, cpk from max. 10,000 readings |
Data memory: | 10,000 readings in max. 500 selectable files; alphanumerical file names; stored readings and statistical values individually recallable |
Interfaces: | Infrared and serial RS232 interface |
Language: | Operator prompting and documentation in German, English, French (optional other languages) |
Operating temperature: | 0 °C to 50 °C/32 °F to 122 °F (storage temperature - 20 °C to +60 °C/-4 °F to 140 °F) |
Surface temperature: | 5° F - 140° F / -15° C - 60° C (standard) |
Power supply: | 2 x round cell (AA) 1.5 V up to 60 hours of operating time |
Housing/keypad: | Protection class IP52 (protection against dust and dripping water) |
Dimensions: | Gauge: 140 mm x 62 mm x 30mm/5.6" x 2.5" x 1.2" (HxWxD) |
Weight: | approx. 200 g/7 oz (gauge including batteries and probe) |
Standards: | DIN EN ISO, ASTM, BS |
Warranty | 1 Year |
Calibration Certificate | Included |
订货清单
The Checkline 3000PRO is supplied as a complete that includes the gauge, probe, manufacturers calibration certificate, a ferrous and or non-errous zero plate(model dependant), 2 calibration foils, 2 AA batteries, soft pouch, instruction manual all in a rugged plastic carrying case.
配件
PROBE-F Ferrous Only Probe (60 mils/1500 microns)
PROBE-N Non-Ferrous Only Probe (60 mils/1500 microns)
PROBE-FN Ferrous & Non-Ferrous Only Probe (60 mils/1500 microns)
PROBE-FN02 Ferrous & Non-Ferrous Probe (8 mils/200 microns)
PROBE-F35 Ferrous Only Probe (140 mils/3500 microns)
PROBE-FN35 Ferrous & Non-Ferrous Probe (140 mils/3500 microns)
3000-RS232 3000-RS232 DB9 Serial Cable to connect 3000PRO to PC
3000-HTF High Temp Footer
3000-HTF-300C Extra Hi-Temp Footer (572°F/300°C) $399.00
3000-PTS Coating Thickness Gauge Stand
3000-IR-USB 3000-IR-USB Infrared Adapter for Data Transfer to PC via USB
3000-IRP 3000-IRP Infra-Red Printer
USB-RS232-ADAP RS232 to USB Adapter
订货型号
3000PRO Gauge WITHOUT PROBE
